Repairing A Wood Panel In A Garage Entry Door Phoenix AZ

by | Dec 2, 2016 | Garage Doors

Recent Articles



When a homeowner notices there is a crack inside of a wooden Garage Entry Door Phoenix AZ, they will want to take the needed steps in repairing it so the door can continue to be utilized. A smaller crack can be repaired with a few items that can be purchased from a hardware store. Here are some steps one can take too fill in a crack in a wood panel by themselves.

Check Over The Damage First

Before repair work is done, it is best to do an evaluation of the damaged portion of the garage door to determine if help from a professional garage door service will be needed. If the crack is limited to one side of the panel, it will most likely be able to be filled in by the homeowner. If it is noticed clear through to the other side of the door, a specialist should be called to handle the job.

Clean The Wood Thoroughly

It is necessary to clean the wood before the crack is filled in. This will ensure the material used to fill the area will adhere without obstructions in the way. Use a mild detergent mixed with water to cleanse the area. This can be applied with a non-abrasive sponge. After it is cleaned, rinse well with a garden hose.

Fill In The Crevice

A wood filling agent will be needed to repair a crack. This is a material much like clay that can be molded into any position. Simply push a small piece of wood filler into the affected area and spread it over the edges of the crack to seal the crevice in its entirety. After the wood filler hardens, a piece of sandpaper can be used to smooth any filler that protrudes out of the cracked portion of the door. It can then be painted.

If a homeowner wishes to call a service that handles the repairing of a Garage Entry Door Phoenix AZ, they will want to find a professional known for doing a good job. Contact a Neighborhood Garage Door Service by taking a look at a website like today!

Related Articles